Rattling noise & stalling issue 2007 Brute Force

[H3avyHitt3r]

I need some help. I have a 2007 Kawasaki Brute Force, and while I was out riding, I noticed a rattling noise coming from under the engine. It didn't sound like the engine was totally failing, but something was definitley loose. After that, it started slowing down, and now it keeps stalling and won't stay running

Any thoughts on what I should look at first or how to figure this out? I'd really appreciaet any tips

 

[BruteBrock]

A rattling noise followed by stalling seems something more serious than just a loose bolt.
Have you tried checking your primary clutch?
They're notorious for rattling when they start to go bad, and if it's seizing up, that'll definitely drag the engine down and cause it to stall.
Another thought, though a bit less common with those symptoms, could be the one-way bearing in the clutch cover, but the primary clutch is where I'd put my money.
You'll probably have to pull the cover off to really get a good look and see what's what.

 

[_laffytaf]

I need some help. I have a 2007 Kawasaki Brute Force, and while I was out riding, I noticed a rattling noise coming from under the engine. It didn't sound like the engine was totally failing, but something was definitley loose. After that, it started slowing down, and now it keeps stalling and won't stay running

Any thoughts on what I should look at first or how to figure this out? I'd really appreciaet any tips

bro, a rattle from under the engine that leads to stalling almost screams CVT issue. Pull that CVT cover off (usually on the right side) and inspect the drive belt. Look for fraying, chunks missing, or if it's completely shredded. Also, check the primary and secondary clutches for any loose parts or obvious damage. A belt shredding can definitely cause a rattle, loss of power, and then stalling